Link2-900MHz | 900Mhz Wireless Radio for Instruments

link2instrument transmitter900mhzThe Link2-900MHz wireless device connects directly to your compatible devices and gives wireless connectivity to other Link2 devices and also connects to the Link2-LAN or Link2-GSM to upload data to the RemoteDNA network.

Link2-900MHz operates in the 900 MHz band with USA (FCC), Canadian (IC), Australia and Israel compliance.

 


The Link2-900MHz has four primary modes of operation:

Data Uplink

Typically the Link2-900MHz is used to relay data from Link2-900MHz and Link2-Mesh radios using an internal 2.4GHz low power radio. Data is received from other units and is transmitted through a high powered 900MHz uplink radio capable of sending the data up to a mile.

Device Server

The Link2-900MHz provides a smart instrument interface that has the ability to communicate with over 70 instruments from leading manufacturers. The Link2-900MHz reads and interprets important measurements, alarms, and the device status. This data is encrypted and transmitted in a low bandwidth format to compatible remote monitoring systems such as the RemoteDNA Web Portal.

Base Radio

A Link2-900MHz is used as a base radio which receives data being transmitted by other Link2-900MHz units and outputs the data to a PC.

Location Awareness

The Link2-900MHz has an integrated GPS to give location information. This provides real-time situational awareness of your remote deployment teams.


The Link2-900MHz has the following external ports:

Link2-900 Ports

Power

The Power port enables the Link2-900MHz to be powered from an external DC 5-16V power source.

Com

The Com port is the primary device connection and supports both TTL and RS 232 serial connections up to 115200 Kbps.

Audio

The Audio port can connect a headset and the Link2-900MHz will give audible warnings to a user indicating alarm or status conditions.


Link2-900MHz Specifications

Transmit Power Output

1 mW – 500 mW

Range (outdoor/line of sight)

Up to 2 miles (3 km)

Up to 10 miles (16 km) with high-gain antennas

Range (indoor/urban)

Up to 1500’ (450m)

Internal Battery

4 x AA cell

External Voltage

4.0 - 16.0 V

H * W * D

13.5cm x 10.2cm x 3.5cm

Antenna

SMA Female (requires antenna with SMA plug)

Internal board mounted (low power radio)

Link2-900MHz Configurations

Part Number
Description
Radio Model Number
CDM60600 Link2-900MHz with GPS Digi XT09-MI
CDM60601 Link2-900MHz with no GPS Digi XT09-MI

Link2-Sensor Downloads